Built-in Quick Clamping Cylinders

 

Built-in Quick Clamping Cylinder K5

 

Releasing:: Locking:   Repeatability: Material: Special:

hydraulic – 50 bar mechanical form fit – interlocking mechanism < 0.002 mm stainless steel -    blow out function -    cover and piston hardened -    Integratet safety system -    laminated disc spring package

 

Built-in Cylinder, round hydraulic	Art. No.	Clamping Force	Holding Force	ØD	ØDN	D1	H	HA	ØLK
K5 without blow-out	305953	5 kN	13 kN	M45x1	15	39	19.8	5.8	36

 

Application:
With a small footprint for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. Also suitable for use as "cylinder locks" with a high repeatability.

 

Note:
Installation clamping cylinder with a low installation height of 19.8 mm and an installation diameter of 45 mm (M45 x 1). Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The installation clamping cylinder is mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing.

 

On request:
- Installation diagrams - Automation solutions

 

 

Built-in Quick Clamping Cylinder K10; K20; K40

 

Releasing:: Locking:   Repeatability: Material: Special:

hydraulic – 50 bar mechanical form fit – interlocking mechanism < 0.002 mm stainless steel -    blow out function -    cover and piston hardened -    Integratet safety system -    laminated disc spring package

 

Built-in Cylinder, round hydraulic	Art. No.	Clamping Force	Holding Force	ØD	ØDN	ØD1	H	HA	ØLK
K10 without blow-out	303628	10 kN	25 kN	78	22	50	30	7	60
K10 with blow-out	305367	10 kN	25 kN	78	22	50	30	7	60
K20 without blow-out	302984	20 kN	55 kN	112	32	78	44	10	88
K20 with blow-out	302992	20 kN	55 kN	112	32	78	44	10	88
K40 without blow-out	303024	40 kN	105 kN	148	40	102	57	15	118
K40 with blow-out	303032	40 kN	105 kN	148	40	102	57	15	118

 

Application:
With a small foot-print for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets.

 

Note:
The installation clamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage.

 

On request:
- Installation diagrams - Automation solutions - Also available as an individual flange version

 

 

Built-in Quick Clamping Cylinder K20 Heavy-Duty

 

Releasing:: Locking:   Repeatability: Material: Special:

hydraulic – 50 bar mechanical form fit – interlocking mechanism < 0.002 mm stainless steel -    cover and piston hardened -    Integratet safety system -    laminated disc spring package

 

Built-in Cylinder, round hydraulic

Art. No.

Clamping Force

Holding Force

ØD

ØDN

ØD1

H

HA

ØLK

K20 Heavy-Duty

306084

20 kN

105 kN

124

32

88

47.80

10

100

 

Application:
Zero-point clamping system for set-up-time-optimized clamping with cutting and non-cutting processing in all areas, also in the food, pharmaceutical and chemical industry. The installed heavy-duty clamping module K20 has the same max. holding force as the clamping module K40. The example here is that the clamping nipple has the same outside dimensions as the clamping nipple in the clamping module K220. As a result, a uniform clamping nipple size can be achieved in all fixtures, and the same module size can be achieved on the machine tables.

 

Note:
The heavy duty installation clamping module, despite small installation dimensions, has increased holding force through the reinforced design. Due to the cartridge construction, simplified installation in the body is possible. The clamping module is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free). Clamping module has one connection: 1x hydr. opening (1).

 

On request:
- Installation diagrams - Automation solutions

 

 

Built-in Quick Clamping Cylinder 10; K20; K40

 

Releasing:: Locking:   Repeatability: Indexability of Pallet: Material: Special:

hydraulic – 50 bar mechanical form fit – interlocking mechanism < 0.002 mm 4x90° stainless steel -    blow out function -    cover and piston hardened -    Integratet safety system -    laminated disc spring package

 

Built-in Cylinder, square hydraulic	Art. No.	Clamping Force	Holding Force	ØDN	ØD1	H	HA	H1	L	L1	ØLK
K10 without blow-out	305243	10 kN	25 kN	22	50	30	7	3.5	85	70	60
K10 with blow-out	305250	10 kN	25 kN	22	50	30	7	3.5	85	70	60
K20 without blow-out	305268	20 kN	55 kN	32	78	44	10	5.0	120	100	88
K20 with blow-out	305276	20 kN	55 kN	32	78	44	10	5.0	120	100	88
K40 without blow-out	305284	40 kN	105 kN	40	102	57	15	5.0	150	130	118
K40 with blow-out	305292	40 kN	105 kN	40	102	57	15	5.0	150	130	118

 

Application:
Can be used as a single clamping cylinder or combined with round installation clamping cylinders in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. A square clamping cylinder prevents the pallet from twisting. The indexing function enables positioning every 90°. Especially suitable for use in turning machines.

 

Note:
The installation clamping cylinders have high holding and pull-in forces with very small installation dimensions. Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage.

 

On request:
- Installation diagrams - Automation solutions

 

 

Built-in Quick Clamping Cylinder K5

 

Releasing:: Locking:   Repeatability: Material: Special:

pneumatic – 6 bar mechanical form fit – interlocking mechanism < 0.002 mm stainless steel -    blow out function -    cover and piston hardened -    Integratet safety system -    spiral spring package

 

Built-in Cylinder, round pneumatic	Art. No.	Clamping Force	Holding Force	ØD	ØDN	D1	H	HA	ØLK
K5 without blow-out	305979	1.5 kN	13 kN	M45x1	15	39	19.8	5.8	36

 

Application:
With a small footprint for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. Also suitable for use as "cylinder locks" with high repeatability. Pneumatic cylinders are optimally suited for use in the foodstuffs, pharmaceutical and chemical industries, as well as in oil-free applications.

 

Note:
Installation clamping cylinder with a low installation height of 19.8 mm and an installation diameter of 45 mm (M45 x 1). Pneumatic pressure is only needed for unclamping (min. 6 bar / max. 12 bar). The installation clamping cylinder is mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing. The pneumatic design has 2 connections: 1 x clamping / unclamping, 1 x turbo connection. The turbo connection is pressurized only briefly with 6 bar after the clamping process, thus achieving the specified pull-in forces.

 

On request:
- Installation diagrams - Automation solutions

 

 

Built-in Quick Clamping Cylinder K10; K20; K40

 

Releasing:: Locking:   Repeatability: Material: Special:

pneumatic – 6 bar mechanical form fit – interlocking mechanism < 0.002 mm stainless steel -    blow out function -    cover and piston hardened -    Integratet safety system -    spiral spring package

 

Built-in Cylinder, round pneumatic	Art. No.	Clamping Force	Holding Force	ØD	ØDN	ØD1	H	HA	ØLK
K10 without blow-out	303602	8 kN	25 kN	78	22	50	30	7	60
K10 with blow-out	305375	8 kN	25 kN	78	22	50	30	7	60
K20 without blow-out	303008	17 kN	55 kN	112	32	78	44	10	88
K20 with blow-out	303016	17 kN	55 kN	112	32	78	44	10	88
K40 without blow-out	303040	30 kN	105 kN	148	40	102	57	15	118
K40 with blow-out	303057	30 kN	105 kN	148	40	102	57	15	118

 

Application:
With a small footprint for installation in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets.

 

Note:
The installation clamping cylinders have high holding and pull-in forces with very small installation dimensions. Pneumatic pressure is only needed for unclamping (min. 6 bar / max. 12 bar). The installation clamping cylinder is mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The pneumatic design has 2 connections: 1 x clamping / unclamping, 1 x turbo connection. The turbo connection is pressurized only briefly with 6 bar after the clamping process, thus achieving the specified pull-in forces.

 

On request:
- Installation diagrams - Automation solutions - Also available as an individual surface-mounted version

 

 

Built-in Quick Clamping Cylinder K10; K20; K40

 

Releasing:: Locking:   Repeatability: Indexability of Pallet: Material: Special:

pneumatic – 6 bar mechanical form fit – interlocking mechanism < 0.002 mm 4x90° stainless steel -    blow out function -    cover and piston hardened -    Integratet safety system -    spiral spring package

 

Built-in Cylinder, square pneumatic	Art. No.	Clamping Force	Holding Force	ØDN	ØD1	H	HA	H1	L	L1	ØLK
K10 without blow-out	305300	8 kN	25 kN	22	50	30	7	3.5	85	70	60
K10 with blow-out	305318	8 kN	25 kN	22	50	30	7	3.5	85	70	60
K20 without blow-out	305326	17 kN	55 kN	32	78	44	10	5.0	120	100	88
K20 with blow-out	305334	17 kN	55 kN	32	78	44	10	5.0	120	100	88
K40 without blow-out	305342	30 kN	105 kN	40	102	57	15	5.0	150	130	118
K40 with blow-out	305359	30 kN	105 kN	40	102	57	15	5.0	150	130	118

 

Application:
Can be used as a single clamping point or combined with round installation clamping cylinders in base plates, machine tables, clamping profiles, columns and towers, swivel bridges, machine pallets and clamping pallets. A square clamping cylinder prevents the pallet from twisting. The indexing function enables positioning every 90°. Especially suitable for use in turning.

 

Note:
The installation clamping cylinders have high holding and pull-in forces with very small installation dimensions. Pneumatic pressure is only needed for unclamping (min. 6 bar / max. 12 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The pneumatic design has 2 connections: 1 x clamping / unclamping, 1 x turbo connection. The turbo connection is pressurized only briefly with 6 bar after the clamping process, thus achieving the specified pull-in forces.

 

On request:
- Installation diagrams - Automation solutions