Zero Point Systems AG | ZPS Zero Point System

Built-up Quick Clamping Cylinders

Built-up Quick Clamping Cylinder K5

Releasing::

Locking:

Repeatability:

Material:

Special:

hydraulic – 50 bar

mechanical form fit – interlocking mechanism

< 0.002 mm

Stainless steel

- blow out function

- cover and piston hardened

- Integratet safety system

- laminated disc spring package

Built-up Cylinder,

round hydraulic

Art. No.

Clamping Force

Holding

Force

ØB

ØD

ØDB

ØDN

K5 without blow-out

306159

5 kN

13 kN

5.80

G1/8

Application:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations.

Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing.

On request:
- Individual housing - Automation solutions

Built-up Quick Clamping Cylinder K10; K20; K40

Releasing::

Locking:

Repeatability:

Material:

Special:

hydraulic – 50 bar

mechanical form fit – interlocking mechanism

< 0.002 mm

stainless steel

- blow out function

- cover and piston hardened

- Integratet safety system

- laminated disc spring package

Built-up Cylinder, round hydraulic	Art. No.	Clamping Force	Holding Force	ØD	ØDB	ØDN	HA	K	R
K10 without blow-out	303487	10 kN	25 kN	78	77.50	22	30	16.50	G1/8
K10 with blow-out	303545	10 kN	25 kN	78	77.50	22	30	16.50	G1/8
K20 without blow-out	302828	20 kN	55 kN	112	110.00	32	50	28.25	G1/4
K20 with blow-out	302836	20 kN	55 kN	112	110.00	32	50	28.25	G1/4
K40 without blow-out	302869	40 kN	105 kN	148	146.00	40	62	32.50	G1/4
K40 with blow-out	302877	40 kN	105 kN	148	146.00	40	62	32.50	G1/4

Application:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flanges.

Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8).

On request:
- Automation solutions

Built-up Quick Clamping Cylinder 10; K20; K40

Releasing::

Locking:

Repeatability:

Indexability of Pallet:

Material:

Special:

hydraulic – 50 bar

mechanical form fit – interlocking mechanism

< 0.002 mm

4x90°

stainless steel

- blow out function

- cover and piston hardened

- Integratet safety system

- laminated disc spring package

Built-up Cylinder, square hydraulic	Art. No.	Clamping Force	Holding Force	ØDB	ØDN	HA	H1	K	L	L1	R
K10 without blow-out	305664	10 kN	25 kN	77.50	22	30	3.50	16.50	85	70	G1/8
K10 with blow-out	305722	10 kN	25 kN	77.50	22	30	3.50	16.50	85	70	G1/8
K20 without blow-out	305680	20 kN	55 kN	146.00	32	57	5.00	35.50	120	100	G1/4
K20 with blow-out	305748	20 kN	55 kN	146.00	32	57	5.00	35.50	120	100	G1/4
K40 without blow-out	305706	40 kN	105 kN	240.00	40	62	5.00	32.50	150	130	G1/4
K40 with blow-out	305763	40 kN	105 kN	240.00	40	62	5.00	32.50	150	130	G1/4

Application:
Can be used as a single clamping point or combined with round surface-mounted clamping cylinders in machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flanges. Clamping flange size 20 for K10, size 40 for K20, for K40 integrated onto the housing.

Note:
Hydraulic pressure is only needed for unclamping (min. 50 bar / max. 60 bar). The cylinders are mechanically locked in the clamped position. The ad-vantages of this are that there are no cumbersome lines and no danger of leakage. The hydraulic version has 1 connection for clamping / unclamping (G1/4 or G1/8).

On request:
- Automation solutions

PPNEUMATICNEUMATISCH

Built-up Quick Clamping Cylinder K5

Releasing::

Locking:

Repeatability:

Material:

Special:

pneumatic – 6 bar

mechanical form fit –

interlocking mechanism

< 0.002 mm

stainless steel

- blow out function

- cover and piston hardened

- Integratet safety system

- spiral spring package

Built-up Cylinder,

round pneumatic

Art. No.

Clamping Force

Holding

Force

ØB

ØD

ØDB

ØDN

K5 without blow-out

306175

5 kN

13 kN

5.80

G1/8

Application:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations.

Note:
Pneumatic pressure is only needed for unclamping (min. 6 bar / max. 12 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The contact surface is the upper surface of the housing. The pneumatic design has 2 connections: 1 x clamping / unclamping and 1 x turbo connection. The turbo connection is pressurized only briefly with 6 bar after the clamping process, thus achieving the specified pull-in forces.

On request:
- Individual housing - Automation solutions

Built-up Quick Clamping Cylinder K10; K20; K40

Releasing::

Locking:

Repeatability:

Material:

Special:

pneumatic – 6 bar

mechanical form fit –

interlocking mechanism

< 0.002 mm

stainless steel

- blow out function

- cover and piston hardened

- Integratet safety system

- spiral spring package

Built-up Cylinder, round pneumatic	Art. No.	Clamping Force	Holding Force	ØD	ØDB	ØDN	HA	K	R
K10 without blow-out	303529	8 kN	25 kN	78	77.50	22	30	16.50	G1/8
K10 with blow-out	305193	8 kN	25 kN	78	77.50	22	30	16.50	G1/8
K20 without blow-out	302844	17 kN	55 kN	112	110.00	32	50	28.25	G1/4
K20 with blow-out	302851	17 kN	55 kN	112	110.00	32	50	28.25	G1/4
K40 without blow-out	302885	30 kN	105 kN	148	146.00	40	62	32.50	G1/4
K40 with blow-out	302893	30 kN	105 kN	148	146.00	40	62	32.50	G1/4

Application:
For mounting on machine tables, clamping profiles, columns and towers, measuring machines, assembly stations in connection with clamping flanges.

Note:
Pneumatic pressure is only needed for unclamping (min. 6 bar / max. 12 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The pneumatic design has 2 connections: 1 x clamping / unclamping, 1 x turbo connection. The turbo connection is pressurized only briefly with 6 bar after the clamping process, thus achieving the specified pull-in forces.

On request:
- Automation solutions

Built-up Quick Clamping Cylinder K10; K20; K40

Releasing::

Locking:

Repeatability:

Indexability of Pallet:

Material:

Special:

pneumatic – 6 bar

mechanical form fit – interlocking mechanism

< 0.002 mm

4x90°

stainless steel

- blow out function

- cover and piston hardened

- Integratet safety system

- spiral spring package

Built-up Cylinder, square pneumatic	Art. No.	Clamping Force	Holding Force	ØDB	ØDN	HA	H1	K	L	L1	R
K10 without blow-out	305672	8 kN	25 kN	77.50	22	30	3.50	16.50	85	70	G1/8
K10 with blow-out	305730	8 kN	25 kN	77.50	22	30	3.50	16.50	85	70	G1/8
K20 without blow-out	305698	17 kN	55 kN	146.00	32	57	5.00	35.50	120	100	G1/4
K20 with blow-out	305755	17 kN	55 kN	146.00	32	57	5.00	35.50	120	100	G1/4
K40 without blow-out	305714	30 kN	105 kN	240.00	40	62	5.00	32.50	150	130	G1/4
K40 with blow-out	305771	30 kN	105 kN	240.00	40	62	5.00	32.50	150	130	G1/4

Note:
Pneumatic pressure is only needed for unclamping (min. 6 bar / max. 12 bar). The cylinders are mechanically locked in the clamped position. The advantages of this are that there are no cumbersome lines and no danger of leakage. The pneumatic design has 2 connections: 1 x clamping / unclamping, 1 x turbo connection. The turbo connection is pressurized only briefly with 6 bar after the clamping process, thus achieving the specified pull-in forces.

On request:
- Automation solutions